Heavy duty industries like windpower and oil & gas need powerful and reliable solutions. RAD’s proven gearbox technology combined with the latest battery technology has resulted in the B-RAD OFFSET . These battery powered torque wrenches fit where standard wrenches cannot be used. The B-RAD OFFSET is based on the standard B-RAD SELECT and have all the features that make these tools so popular and user-friendly. With one major difference, the torque multipliers are placed in an offset position, so that the wrench can be used better to tighten bolts in tight and difficult to reach spaces.

The B-RAD S equipped with a built-in transducer, the B-RAD S makes torquing and logging easier and more efficient than ever with its ability to read and display torque in real time. With torque and angle capabilities, the B-RAD S is ready for the most critical applications and will hold up to scrutiny on a variety of projects. The B-RAD BL S includes Bluetooth connectivity, torque check functionality, and automatic reaction arm release to minimize your downtime and maximize your torque output.

RAD Torque System is taking torque to the extreme with the all-new B-RAD X. The latest generation of our popular battery tool , the B-RAD X is raising the bar for torque range capacity with a battery tool, maxing out at an impressive 11,000 ft. lbs./15,000 Nm – making the B-RAD X officially the most powerful battery-powered torque tool on the market.

The new B-RAD S Battery torque wrenches comes with two simple buttons to increase or decrease the value by 10 Nm. At the four-digit display the set torque value is displayed. The B-RAD SELECT remembers the last set torque value even after the battery has been removed.

The E-RAD pistol grip electronic torque wrenches are lighter, faster, stronger and more reliable than other conventional means of bolting.

The E-RAD BLU-S, a transducer equipped E-RAD BLU for the highest accuracy on the market featuring torque measurement on the bolt. The E-RAD BLU-S has its transducers position on the outpoint of the gearbox and guaranties therefore that torque displayed is torque applied to the fastener.

The V-RAD will quickly tighten or loosen bolts with high accuracy and reliability. The torque can be set by a membrane key control stage less with increments of 1 Nm.

The RAD High-Speed torque wrenches incorporate a precision engineered high speed gear box designed for faster run down on time sensitive bolting applications.

Precision design and engineering has brought about the next generation in torque wrenches – the RAD GEN-X . Designed for extreme duty use in a variety of industries worldwide.

Accidents caused by incorrectly tightened wheel nuts are a serious problem. That’s why the RAD Wheel Nut Bolting was designed with one job in mind: wheel nut bolting where torque control is a must. RAD planetary gear torque wrenches are vibration free and have the accuracy to prevent accidental under- and over-tightening. The nose extensions are ideal for reaching wheel nut studs that are recessed and have tight clearances. The nose extension (-R) Developed exclusively for extreme duty maintenance of mining haul trucks from 50-400 ton capacities and front-end loaders. The extended nose allows safe access of virtually all wheel configurations found on today’s heavy equipment. The nose extension kit (-NX) Designed with flexibility in mind. Complete with 3 different reaction arms and a nose extension for hard-to-reach areas, the NX Kit is a “go anywhere” tool capable of a variety of applications but especially suitable for off-road construction equipment.

• Torque Range: 87 Nm to 25,009 Nm
• Compact Design/Uni-body Housing
• Multi-Directional Swivel Assembly
• Anti-Jam Torque Release Lever
• Best in Industry Strength-To-Weight Ratio
• 1 Year Warranty

• Runs Up to 4 Hydraulic Torque Wrenches
• Three-Stage High Performance Pump
• External Adjustable Pressure Regulator
• Heavy Duty Roll Cage
• Remote Control Assembly
• Cooling System
• 10,000 PSI / 690 BAR
• Hour Meter

The versatile HexPro™ Series Hydraulic Torque Wrench Features:

• Torque from 220 Nm to 39,130 Nm
• Compact Design
• Multi-Directional Swivel Assembly
• Anti-Jam Torque Release Lever
• Best in Industry Strength-to-Weight Ratio
• 1 Year Warranty

Delta series tensioners are designed to be safe and reliable.

• 1500 bar system delivers 30% more load than TensionPro's standard range
• Latest seal technology
• Low maintenance design and high cycle life
• Maximum stroke indicator
• Over-stroke protection
• Integrated with TensionPro hoses and pumps
• Pressure tested and CE marked
• Detailed operating and safety manuals
• Special one-off designs available for any thread size, load and diameter requirements

duo series multi-stage tensioners are versatile and reliable hydraulic bolt tensioners suitable for high load and tight space applications. Optimised for use on wind turbines they have been designed for long-life, lowmaintenance use, and are suitable for use on single bolts, or grouped together for multiple tightening of bolted joints. duo tensioners are extensively used for slewing rings, power-gen applications, structural and all critical bolting.

HNBC Hydraulic Nuts are used in direct replacement of the existing conventional nut. They allow accurate loading of the bolt, and the load is then permanently retained by means of a load locking collar. Particularly useful for smaller diameters nuts, instead of HNTC top collar nuts, where there is limited space for hydraulic fittings, or as replacement nuts for legacy equipment.

Hard wearing, strong and accurate. Putting reliable hydraulic torque in your hands - the Titeforce SD Pro Hydraulic Torque Wrench is suited to a wide range of applications.

Torque Range: 172-36992N.m

The RG-Series is a Single Acting, General Purpose, Spring Return Cylinder designed for use in production, maintenance and fabrication applications.

The RFJ-Series is a Single Acting, Spring Return, Compact, Flat Cylinder designed for use in narrow spaces and areas with low over head clearance.

The RLP-Series is a Single Acting, Spring Return, Low Profile Cylinder. Its compact design combines maximum stroke with low collapsed height.

The RJ-Series is a Single Acting, Spring Return Cylinder that is ideally suited to jacking, testing, weighing and general maintenance applications that require a high tonnage short stroke cylinder design.

The RHS-Series is a Single Acting, Spring Return, Hollow Piston Rod Cylinder. The hollow piston allows for a rod or cable to be inserted through the entire body length. They can be used in tensioning, load testing, bush extracting and maintenance applications.

The RPLC-Series is a Single Acting, Load Return, Pancake, Locking Collar Cylinder. It is a compact design that features a threaded piston rod and lock ring. These cylinders are ideally suited to bridge construction and maintenance.

The RSLC-Series is a Single Acting, Load Return, High Tonnage, Locking Collar Cylinder. It features a threaded piston rod and lock ring. When the lock ring is screwed down and engaged with the cylinder body, the load can be held mechanically for extended periods. These cylinders are ideally suited to bridge construction and jacking applications requiring safe extended load holding.

The AC-Series is a Single Acting, Lightweight, High Strength, Aluminium, Spring Return Cylinder. Ideal for use in applications where weight and portability are paramount. They can be used in applications such as axle correction, bridge jacking, machinery maintenance and other non-production applications.

The ACHS-Series is a Single Acting, Spring Return, Hollow Piston Rod, Aluminium Cylinder. The hollow piston allows for a rod or cable to be inserted through the entire body length. They can be used in tensioning, load testing, bush extracting and maintenance applications where weight and portability are paramount.

The ACSLC-Series is a Single Acting, Spring Return, Locking Collar, Aluminium Cylinder. These cylinders are ideally suited to applications requiring safe extended load holding.

The RAP-Series is a lightweight, Spring Return, Aluminium Pull Cylinder used in steel structural works, ship building and tower tensioning.

The RSH-Series is a Single Acting, Load Return, High Tonnage Cylinder offering the lowest collapsed height. They are ideally suited for use in civil construction, heavy jacking and other high load applications in confined spaces.

The RP-Series are a Single Acting, Hydraulic Pull Cylinders that may be used in all positions. The hydraulic pulling action and spring loaded piston rod extends the piston rod when pressure is released.

The RC Series is a Single Acting, Spring Return Cylinder that has been designed for general purpose applications that require the cylinder to be collar or base mounted. These cylinders can be used in all positions.

The TTP-Series Pin Pusher is specially designed for tracked machines, tractors, loaders, shovels, excavators, etc. It is suitable to use with most modern machines including JCB, Caterpillar, Komatsu and Poclain manufactured track machines.

The DHS-05 and DHS-1 Hydraulic Spreaders are designed for rated capacity spreading. A wide variety of applications exist for this category of product.

The DHS-5 Hydraulic Spreader is a small, light and powerful precision tool that generates 5 tons of spreading force at the feet and has a spring return cylinder. The spreader features parallel opening jaws that will not drift away or creep down.

The DHS-15 Hydraulic Spreader features high strength steel construction and spring return cylinder. It is designed for rugged operating applications and has serrated jaws for grip.